Welcome, visitor! [ Register | Loginrss

 

$Call for Quote

2009 Vactor Prodigy Hydro-Excavator

Description

VACTOR “Prodigy” Hydro-Excavator, EQ# 4311, having Positive Displacement (PD) Blower driven from chassis engine, 6 cubic yard debris hopper and 600 gallon water capacity, equipped with the following: STANDARD EQUIPMENT Hydro-Excavator Standard Module Debris Body 6 Cubic yard volumetric debris body Cylindrical design, 1/4″ abrasion & corrosion resistant Ex-Ten steel Flat style, 3/4 rear door, hinged at top w/replaceable neoprene seal Hydraulic rear door locking system Hydraulic rear door open & close system 6″ Knife valve with 10′ drain hose and Cam-Lock connector 8″ Inspection port, Top mounted with ladder for easy access Rear door support prop for operator safety Front mounted hydraulic dump cylinder, 50 degree dump angle, power up/power down Dual 8″air ports with 10″ stainless steel float ball shutoff system/stainless steel screens Rear loading port Water Tanks 600 Gallon capacity – #304 3/16″ stainless steel water tank Water tank separate from debris tank Includes anti-siphon device & anti-splash valve w/25′ water fill hose and connectors Electric water level indicator with low water warning system 10 Year warranty against corrosion and cracking Water System Water system rated design is 10 GPM @ 2500 psi Hydraulically operated triplex piston water pump with electronic flow management Water pump on/off located on pendant control and control box Electronic multi-flow control Handgun hose 3/8″ x 75′ w/operating pressure of 3500 psi and burst pressure of 14,500 psi, located in heated cabinet. Hose reel is auto rewind Vacuum System Roots 624 (16″ HG) 3200CFM @ Max. Speed 3000 RPM Direct Drive OMSI Transfer Case Single Cyclonic Separator with 13″ clean out door Cartridge type dual element final filter Vacuum relief located at the inlet to the final filter to allow operator to vent to atmosphere. Pendant control operated. Remote push button pendant control w/75′ cable with a vacuum relief, water on/off and throttle control Control Panel (Located Passengers Side) Located inside an aluminum box for protection The control panel will include: e-stop, blower tachometer w/hour meter, blower temperature gauge, vacuum gauge, vacuum relief switch, hydraulic oil temperature gauge, throttle control, water pump on/off, multi-flow control switch, electric low water indicator, boom controls, body dump and door open/close functions, and circuit breakers Vacuum Pipe Package Package will be 1- 6″ x 5′ aluminum fluidizer tube w/rubber safety end; 3 – 6″ x 5′ aluminum flanged pipe; 4 – 6″ quick clamps All rubber boot connections between debris body and vacuum system will be self-adjusting and pressure fitting type Water System/Pipe Package Includes one hand gun, one digging wand, one dual nozzle assembly, one triple nozzle assembly, one fan nozzle assembly, quick couplers and shut-off valve, three extension pipe assemblies totaling 20 ft. Hydraulic System Hydraulic reservoir capacity of 50 gallons w/strainers on all suction lines Oil level sight gauges on hydraulic reservoir Inspection port for maintenance 10 micron spin-on type filter Electrical Entire system will be moisture and vapor sealed. All wires function stamped and color coded Electrical connections require no exposure wires or terminals Light bulbs will be shock mounted Complete wiring diagram is provided with machine, circuit breakers are supplied Storage Cabinets 1 – 50″ x 30″ deep x 30″ high aluminum tool box located right behind cab/water pump and hose retractable handgun reel will be located in this box, box will be heated. Tool trays located above rear axle. Mounting Approved truck chassis Painting All metal surfaces shot blasted prior to painting All metal surfaces will be phosphate washed prior to painting Coated with a minimum of 2.5 mil primer Painted with a minimum of 2.5 mil finish paint process Module components will be painted prior to assembly Miscellaneous Tow hooks front and rear Mud Flaps LED stop, turn, back-up, clearance and tail Electronic back-up alarm – 97 dB(A) Aluminum Fenders 25 ft Spring Loaded Ground Reel Factory Training and Start-Up Debris Body Folding pipe rack, street side (Tool trays only) Splash shield, rear door (Recommended option) Air Excavation Package Boss Air Compressor – 185CFM/150PSI rotary screw air compressor with hour-meter, pressure gauge, oil temperature gauge, high pressure shutdown, and high temperature shutdown. 50 feet of 1″ air hose with auto rewind reel 10 feet of 1″ lightweight hose Ergonomic trigger type handle with pressure display, 4′ non-conductive lance, 3′ non-conductive lance extension, blow back shield, and quick disconnect. High efficiency nozzle sized to match compressor Truck Mounted Boom 6″ I.D. wire reinforced rubber suction hose Boom will have an electric-over-hydraulic solenoid system with speed flow control valves Electric over hydraulic boom controls – up/down/right/left/extend/retract Boom controls located on control panel(rocker switch) and hand carried pendant control

Ad Reference ID: N/A

Leave a Reply

Item Location

To inquire about this ad listing, complete the form below to send a message to the ad poster.

Information about the ad poster

  • Listed by: mrenner
  • Member Since: January 25, 2010

Other items listed by mrenner

View all ads by mrenner »